Tsudakoma TAW is a tape production and slitting line used in composites manufacture, still in its builder’s current range. It spreads carbon, glass or other reinforcing fibre tows and impregnates them with thermoset or thermoplastic resin to form unidirectional tape, and slits wide material into narrow tapes. It supplies tape weaving and automated fibre placement and lay-up.
Checked against the builder's page. On 2026-11-06 an automated check found this model named on the builder's page, www.tsudakoma.co.jp. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Tape production and slittingCompositesIn the builder's current range
Key specifications
Specifications incomplete: 0 of 3 key figures recorded
- Line speed (max.)—
- Working width—
- Tape width—
- Make
- TsudakomaJapantsudakoma.co.jp (the builder's website, opens in a new tab) All 11 machines from Tsudakoma
- Process stage
- Composites
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H3-A64 (as listed by the organiser)
Read from the builder's published page: www.tsudakoma.co.jp, on 2026-08-30.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.tsudakoma.co.jp,
- Last changed
Related machines
Also from Tsudakoma
Other machines of this kind: Tape production and slitting
Elsewhere in Composites
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.