The KXE is an electronic tension meter for measuring the warp tension on stationary or running weaving machines. It measures the thread tension of a band of warp threads 50 mm wide with a measuring head of two ball-bearing rollers, connected by cable to a handheld display unit with USB output and a memory for 4000 readings.
Yarn testingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 0 of 5 key figures recorded
- Yarn test speed (evenness / hairiness)—
- Force capacity—
- Tensile (crosshead) speed—
- Yarn count range—
- Test standards—
- Make
Hans SchmidtGermanyhans-schmidt.com (the builder's website, opens in a new tab) All 17 machines from Hans Schmidt - Class
- Yarn testing
- Process stage
- Testing and laboratory
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H8-A04 (as listed by the organiser)
Specification
| Parameter | Value | Unit |
|---|---|---|
| Measuring range, KXE-20K | 0.50 – 20.00 | daN |
| Resolution, KXE-20K | 0.01 | daN |
| Calibration material | Fabric tape | |
| Width of measured warp band | 50 | mm |
| Accuracy (10 % to 90 % of range) | ±1 % Full Scale (Messbereichsende) und ±1 Digit | |
| Accuracy (remaining range) | ±3 % Full Scale und ±1 Digit | |
| Over-range | 10 | % Full Scale |
| Overload protection | 200 | % of measuring range |
| Measuring principle | Strain gauge full bridge | |
| Signal processing | digital 24 Bit A/D converter | |
| Internal measuring frequency | ca. 1 | kHz |
| Display | LCD 4-digit, 11 mm high | |
| Memory | Max. 4000 | readings |
| Output signal | USB | |
| Communication frequency | max. 100 | measurements/s |
| Cable, measuring head to display | 1.5 | m |
| Temperature range | 10 – 45 | ºC |
| Air humidity | max. 85 | % rel. humidity |
| Power supply | LiPo battery (approx. 60 h continuous operation, charging time approx. 3.5 h), USB plug-in power supply 100 – 240 V AC | |
| Display unit weight, net | ca. 340 | g |
| Sensing rollers | 2 Rollen a 22 mm (ball-bearing), total 50 mm | |
| Support roller width | 100 | mm |
| Stroke adjustment of support frame | 24 | mm |
| Support frame dimensions | 108 x 138 | mm |
| Measuring head weight, net | ca. 1000 | g |
| Measuring head weight, gross | ca. 1800 | g |
Read from the builder's published page: www.hans-schmidt.com, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hans-schmidt.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hans Schmidt
Other machines of this kind: Yarn testing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.