- Make
- Karl Mayer
- Class
- Sectional warper
- Process stage
- Weaving
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Maximum number of creel ends | 800 |
| Yarn sheet tension range beaming | 600 N - 4,000 N |
| Beaming speed | max. 200 m/min |
| Warp beam diameter | max. 800 mm / 1,000 mm |
| Warping speed | max. 1,000 m/min |
| Working width | up to 3,600 mm |
| NOV-O-MATIC 800 / 1000 | Automatic sectional warping machine for 800 mm or 1000 mm beam diameter |
Read from the builder's published page: www.karlmayer.com, on 2026-08-31.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Karl Mayer
Other machines of this kind: Sectional warper
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.