Karl Mayer Warpers for cotton yarn is a direct warper used in weaving, still in its builder’s current range. It winds yarn from a creel of packages in parallel onto a warper beam, each beam carrying only part of the final number of ends. Several warper beams are later combined at the sizing machine or beaming machine into one weaver beam, which distinguishes it from sectional warping, where the full warp is built in bands on a drum.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Direct warperWeavingIn the builder's current range
Key specifications
Specifications incomplete: 0 of 3 key figures recorded
- Working width—
- Warping speed (max.)—
- Beam flange diameter (max.)—
- Make
Karl MayerGermanykarlmayer.com (the builder's website, opens in a new tab) All 77 machines from Karl Mayer - Class
- Direct warper
- Process stage
- Weaving
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-5 Noise ISO 9902-5
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H4-C27 (as listed by the organiser)
Read from the builder's published page: www.karlmayer.com, on 2026-08-24.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for preparatory machinery to weaving and knitting. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-5 Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting — Amendment 2
- Noise
- ISO 9902-5 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.karlmayer.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Karl Mayer
Other machines of this kind: Direct warper
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.