Morgan Tecnica 330 is a material handling system, still in its builder’s current range. Its builder lists max roll diameter 300 mm and installed power 3 kW. Material handling equipment moves material between process stages, including can and bobbin transport, roving and cop conveyors, beam trolleys and lifts, fabric roll handling and warehouse systems.
Material handlingUtilities and handlingIn the builder's current range
Key specifications
Specifications incomplete: 1 of 4 key figures recorded
- Load capacity (max.)—
- Working width—
- Machine speed (max.)—
- Roll diameter (max.)300 mm
- Installed power3 kW
Specification
| Parameter | Value |
|---|---|
| Max roll diameter | 300 mm |
| Installed power | 3 kW |
Read from the builder's published page: www.morgantecnica.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.morgantecnica.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Morgan Tecnica
Other machines of this kind: Material handling
Elsewhere in Utilities and handling
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.