Morgan Tecnica 104 Tavolo ad Aghi Conveyorizzato is a spreading machine used in garment making, still in its builder’s current range. Its builder lists hole grid spacing 10 x 10 cm, module length 4 and 6 metri and fabric height 180 cm / 230 cm. It lays fabric ply on ply along the cutting table to form a lay, controlling tension, edge alignment and ply length and cutting each ply at the end of the lay.
Spreading machineGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 1 of 4 key figures recorded
- Spreading speed (max.)—
- Fabric width (max.)1 800–2 300 mm
- Roll weight (max.)—
- Roll diameter (max.)—
- Table module length4 mm
- Table height870 mm
Specification
| Parameter | Value |
|---|---|
| Hole grid spacing | 10 x 10 cm |
| Module length | 4 and 6 metri |
| Adjustable height | da 87 cm a 93 cm |
| Fabric height | 180 cm / 230 cm |
| Voltage | 400V 3Ph 50/60 Hz |
Read from the builder's published page: www.morgantecnica.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.morgantecnica.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Morgan Tecnica
Other machines of this kind: Spreading machine
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.