Picanol Ultimax is a rapier loom, still in its builder’s current range. Its builder lists width reduction 80 - 100 cm, warp beam diameter 805 mm - 1,000 mm - 1,100 mm and yarn range spun yarns nm 254 - Nm 3 Ne 118 - Ne 1,8. It inserts weft with a rigid or flexible rapier, or with two rapiers that transfer the yarn mid-shed, giving positive control of the weft.
Rapier loomWeavingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 5 key figures recorded
- Nominal reed width—
- Loom speed (max.)—
- Weft colours—
- Spun yarn count range2.32–197 tex
- Warp beam diameter (max.)805–1 000 mm
- Available widths190–4 000 mm
- Filament count range2.22–333 tex
- Cloth roll diameter (max.)550 mm
- Make
PicanolBelgiumpicanol.be (the builder's website, opens in a new tab) All 18 machines from Picanol - Class
- Rapier loom
- Process stage
- Weaving
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-6 Noise ISO 9902-6
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H3-E01 (as listed by the organiser)
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Useful widths | 190, 210, 220, 230, 240, 250, 280, 300, 320, 340, 360, 380 and 400 cm | 190–4 000 mm |
| Width reduction | 80 - 100 cm depending on reed width | |
| Yarn range Spun yarns Nm | 254 - Nm 3 Ne 118 - Ne 1,8 | 2.32–197 tex |
| Free Flight up to Nm | 1 Ne 0.6 | |
| Filament yarns | 20 den - 3,000 den 22 dtex - 3,300 dtex | 2.22–333 tex |
| Free Flight as fine as | 10 den 11 dtex | |
| Warp beam Diameter | 805 mm - 1,000 mm - 1,100 mm | |
| Electrical warp | 6 contact bars 25 mm pitch or 8 contact bars 16 mm pitch | |
| Cloth take-up Diameter of cloth roll | 550 mm (warp beam 805 mm) |
Read from the builder's published page: www.picanol.be, on 2026-08-22.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for fabric manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-6 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery
- Noise
- ISO 9902-6 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.picanol.be,
- Archived copy
- snapshot, captured 2025-08-07
- Checked by
- Textile School,
- Last changed
Related machines
Also from Picanol
Other machines of this kind: Rapier loom
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.