Sperotto Rimar SantaFrame is a stenter used in dyeing, finishing and printing. Its builder lists machine speed 8 – 100 m/min, length of drying chamber 2 m and fabric overfeed 0 – 60% infinitely variable. It holds fabric by its selvedges on pins or clips carried on chains through a heated chamber, setting the width while it dries, heat sets or cures applied finishes.
StenterDyeing, finishing and printingNot established
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Working width800–3 200 mm
- Machine speed (max.)8–100 m/min
- Drying chambers—
- Max. temperature—
- Overfeed range0–60 %
- Chamber length2 000 mm
- Make
Sperotto RimarPart of the Santex Rimar group.Italysantexrimar.com (the builder's website, opens in a new tab) All 16 machines from Sperotto Rimar - Class
- Stenter
- Process stage
- Dyeing, finishing and printing
- Lifecycle
- Not established
- Standards
- Safety ISO 11111-7 Noise ISO 9902-7
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H6-C52 (as listed by the organiser)
Specification
| Parameter | Value |
|---|---|
| Working width | 80 – 320 cm in steps of 20 cm, other working width on request |
| Total width | Working width plus 200 cm |
| Length of drying chamber | 2 m |
| Total machine length | Number of chambers plus approx. 17.5m incl. double padder and plaiter |
| Machine speed | 8 – 100 m/min |
| Power supply | Approx 315 kw |
| Fabric overfeed | 0 – 60% infinitely variable |
Read from the builder's published page: www.santexrimar.com, on 2026-11-13.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for dyeing and finishing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-7 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery — Amendment 2
- Noise
- ISO 9902-7 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.santexrimar.com,
- Archived copy
- None recorded. The source link may not survive, and this record cannot then be checked.
- Checked by
- Textile School,
- Last changed
Related machines
Also from Sperotto Rimar
Other machines of this kind: Stenter
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.