Sperotto Rimar Universa is a relaxation and shrink drier used in dyeing, finishing and printing, still in its builder’s current range. Its builder lists mechanical speed 4 ÷ 40 m/ min, working width 180 – 220 – 260 cm and connected load 12 kW. It dries fabric, mainly knitted or tubular goods, on an overfeeding or vibrating conveyor in hot air, allowing it to shrink freely and release tensions from earlier processing.
Relaxation and shrink drierDyeing, finishing and printingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Working width1 800–2 200 mm
- Machine speed (max.)4 m/min
- Evaporation capacity—
- Drying chambers—
- Steam consumption200–240 kg/h
- Installed power12 kW
- Make
Sperotto RimarPart of the Santex Rimar group.Italysantexrimar.com (the builder's website, opens in a new tab) All 16 machines from Sperotto Rimar - Process stage
- Dyeing, finishing and printing
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-7 Noise ISO 9902-7
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H6-C52 (as listed by the organiser)
Specification
| Parameter | Value |
|---|---|
| Working width | 180 – 220 – 260 cm |
| Mechanical speed | 4 ÷ 40 m/ min |
| Connected load | 12 kW |
| Absorbed load | 8.5 kW |
| Saturated steam | 5 bar |
| Steam average consumption | 200 – 240 – 280 Kg/h |
| Compressed air feeding | 5 bar |
| Compressed air consumption | 100 Nl/h |
Read from the builder's published page: www.santexrimar.com, on 2026-08-31.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for dyeing and finishing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-7 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery — Amendment 2
- Noise
- ISO 9902-7 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.santexrimar.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Sperotto Rimar
Other machines of this kind: Relaxation and shrink drier
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.