Trikso Machineries 9918 is a direct warper used in weaving, still in its builder’s current range. It winds yarn from a creel of packages in parallel onto a warper beam, each beam carrying only part of the final number of ends. Several warper beams are later combined at the sizing machine or beaming machine into one weaver beam, which distinguishes it from sectional warping, where the full warp is built in bands on a drum.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
- Class
- Direct warper
- Process stage
- Weaving
- Lifecycle
- In the builder's current range
All 9 machines from Trikso Machineries →
Read from the builder's published page: www.tim-india.com, on 2026-11-03.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Trikso Machineries
Other machines of this kind: Direct warper
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.