Xorella Select is a yarn conditioning plant used in spinning, still in its builder’s current range. It exposes packages of yarn to steam or humid air, often under vacuum, so that moisture penetrates evenly and twist is set. It is used after spinning, twisting or texturing and before weaving or knitting, reducing snarling and static and restoring the moisture regain lost in processing.
Checked against the builder's page. On 2026-11-06 an automated check found this model named on the builder's page, www.fongs.eu. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Yarn conditioning plantSpinningIn the builder's current range
Key specifications
Specifications incomplete: 0 of 3 key figures recorded
- Batch capacity—
- Process temperature (max.)—
- Cycle time—
- Make
- XorellaSwitzerlandxorella.com (the builder's website, opens in a new tab) All 4 machines from Xorella
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H5-C09 (as listed by the organiser)
Read from the builder's published page: www.fongs.eu, on 2026-08-25.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.fongs.eu,
- Archived copy
- snapshot, captured 2026-06-11
- Last changed
Related machines
Also from Xorella
Other machines of this kind: Yarn conditioning plant
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.