ASTM D6797
Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
ASTM
ASTM appears on 528 crosswalks here — as the issuing body, or as an equivalent to another body's standard.
Every issuing body
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 61–70 of 528 Show the whole register
ASTM International
Test methods and specifications across materials; textiles are committee D13. Frequently named in North American buyer specifications.
United States, widely cited elsewhere Official site
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
ASTM D6869
Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D737
Standard Test Method for Air Permeability of Textile Fabrics
Standard Test Method for Air Permeability of Textile Fabrics
ASTM E169
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
ASTM E2214
Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
ASTM E2587
Standard Practice for Use of Control Charts in Statistical Process Control
Standard Practice for Use of Control Charts in Statistical Process Control
ASTM E648
Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
ASTM F2933
Standard Consumer Safety Specification for Crib Mattresses
A product safety specification rather than a material test method, which is why its material scope is recorded as not applicable: it governs a finished article and the…
ISO 139
Textiles — Standard atmospheres for conditioning and testing
The atmosphere every other textile test is supposed to be run in. Textiles absorb and release moisture, so mass, strength and dimensions all move with the room.
ISO 16549
Textiles — Unevenness of textile strands — Capacitance method
How much a yarn or sliver varies in mass along its length, measured by passing it through a capacitor. Reported as CV%, plus counts of thin places, thick…