ISO 1833-1
Textiles — Quantitative chemical analysis — Part 1: General principles of testing
How the percentages on a composition label are established — dissolving one fibre away and weighing what is left.
ASTM
ASTM appears on 528 crosswalks here — as the issuing body, or as an equivalent to another body's standard.
Every issuing body
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 71–80 of 528 Show the whole register
ASTM International
Test methods and specifications across materials; textiles are committee D13. Frequently named in North American buyer specifications.
United States, widely cited elsewhere Official site
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
ISO 2060
Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method
Establishes what count a yarn actually is, by weighing a measured length of it. Nearly every downstream calculation on a mill floor — fabric weight, consumption, cost per…
ISO 2061
Textiles — Determination of twist in yarns — Direct counting method
How many turns per unit length are in a yarn, counted directly by untwisting it.
ISO 2062
Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
How strong a single end of yarn is, and how far it stretches before it breaks, measured on a machine that pulls at a constant rate.
ISO 3801
Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
The GSM number on every fabric specification. Determines fabric mass per unit area by weighing a cut specimen of known size.
ISO 7211-2
Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length
Counting ends and picks per unit length — the construction figure that sits beside GSM on every woven fabric specification.
ISO 7211-3
Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric
How much longer a yarn is than the fabric it came out of, because it bends over the yarns crossing it. Measured by straightening a removed yarn under…
ASTM C1695
Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
Classified under ICS 13.340.99 Other protective equipment. Covers the finished article rather than the fibre or fabric it is made from, which is what separates this class from…
ASTM D1059
Standard Test Method for Yarn Number Based on Short-Length Specimens
Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM D1113
Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool
Standard Test Method for Vegetable Matter and Other Alkali-Insoluble Impurities in Scoured Wool