ISO 3303-2:2020
Rubber- or plastics-coated fabrics — Determination of bursting strength — Part 2: Hydraulic method
Classified under ICS 59, the international subject classification for textile and leather technology.
Reference register
Textile standards crosswalk: ISO, ASTM, AATCC and BIS
3,037 test methods indexed by number across ISO, ASTM, AATCC, BIS, GB, JIS and EN, 503 of them with a full record. Where an equivalent is known it is stated as IDT, MOD or NEQ, with the deviation declared wherever it is MOD.
Every issuing body
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 401–410 of 3,037
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
ISO 3377-2:2025
Leather — Physical and mechanical tests — Part 2: Determination of double edge tear load
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 3379
Leather — Determination of distension and strength of surface (ball burst method)
Leather — Determination of distension and strength of surface (ball burst method)
ISO 3572
Textiles — Weaves — Definitions of general terms and basic weaves
Textiles — Weaves — Definitions of general terms and basic weaves
ISO 3696
Water for analytical laboratory use — Specification and test methods
Water for analytical laboratory use — Specification and test methods
ISO 374-2
Protective gloves against dangerous chemicals and micro-organisms — Part 2: Determination of resistance to penetration
Classified under ICS 13.340.40 Hand and arm protection. Covers the finished article rather than the fibre or fabric it is made from, which is what separates this class…
ISO 374-4
Protective gloves against dangerous chemicals and micro-organisms — Part 4: Determination of resistance to degradation by chemicals
Classified under ICS 13.340.40 Hand and arm protection. Covers the finished article rather than the fibre or fabric it is made from, which is what separates this class…
ISO 374-6
Protective gloves against dangerous chemicals and micro-organisms — Part 6: Protective gloves for hairdressers
Classified under ICS 13.340.40 Hand and arm protection. Covers the finished article rather than the fibre or fabric it is made from, which is what separates this class…
ISO 3801
Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
The GSM number on every fabric specification. Determines fabric mass per unit area by weighing a cut specimen of known size.