ISO
ISO 3801 Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
The GSM number on every fabric specification. Determines fabric mass per unit area by weighing a cut specimen of known size.
- Number
- ISO 3801
- Committee
- ISO/TC 38
- Status
- active
Equivalents
| Body | Number | Equivalence | Deviation |
|---|---|---|---|
| ASTM | ASTM D3776 | NEQ | Parallel standard, not an adoption of the ISO text under ISO/IEC Guide 21. Measures the same property by a comparable method; results should not be assumed interchangeable. Confirm which standard the buyer specifies. ASTM D3776 covers several options for specimen size and applies beyond woven fabric. |
Verification coverage
Checked against ASTM. Not yet checked: AATCC, BIS, SAC, JIS, EN, DIN — an absent row here does not mean no equivalent exists.
What this standard is for
Where it is used
On virtually every woven fabric specification and every incoming fabric inspection. It is the number buyers quote first and the one most often argued about.
Why it matters
Fabric is bought by weight and garments are costed by consumption, so a GSM running heavy raises cost on every unit while one running light risks rejection against the specification. On a large order the difference between the two is the margin.
What to watch for
GSM is meaningless without the conditioning state it was measured in, and finishing changes it substantially — a greige weight and a finished weight are different numbers for the same fabric.
Calculators that implement this
- 3D Woven Preform Fibre Volume Fraction Estimator
- Air Permeability & Fabric Porosity Calculator
- Comprehensive Woven Fabric Costing Calculator
- Elastane Plating Draft, Content Percentage & Retraction Force
- Fabric Consumption per Garment Calculator
- Fabric GSM & Yarn Consumption Calculator
- Fabric Roll Diameter, Mass & Handling Limit Calculator
- Knit Tube Slitting: Open Width, Trim Loss & Marker Fit
- Knitted Fabric Bursting Strength Modeler
- Loop Length for a Target Finished Weight, Through Finishing Shrinkage
- Positive Feeder Slippage, Loop Length Error & Barre Spacing
- Production Schedule Capacity & Constraint Solver
- Rectangular Bed Net (Mosquito Net) Netting Area, Mass & Order Quantity
- Stenter Chain Width, Overfeed & Target GSM Solver
- Stitch Cam Setting Window, Tightness Factor & Fabric Weight
- Stitch Length & Course Length Estimator
- Target GSM to Yarn Count & Construction Solver
- Terry Towel Pile-to-Ground Ratio & GSM Calculator
- Textile Unit Converter: Fabric Weight, Tenacity & Yarn Length
Buy the official copy from ISO
Metadata only — purchase the standard from the issuing body.
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.