Jump to a calculator 671 tools
Finishing & Environmental
Water Footprint per Kilogram of Dyed Fabric
Litres per kilogram is the number buyers audit. Total consumption without a production base means nothing.
Water per kg of Fabric
— L/kg
Total process water including reuse
Freshwater Position
- Freshwater per kg
- — L/kg
- Recycling Rate
- — %
- Freshwater Cost per Day
- —
- Water Cost per kg
- —
Water Sources
—% fresh —% recycled
Best-practice dyehouses reach 50-80 L/kg. Above 150 L/kg the losses are usually in rinsing practice rather than machine design.
Using this calculator
About the Water Footprint per Kilogram of Dyed Fabric
The formula
This is the expression the tool evaluates. Every term is named underneath, with the unit it must be supplied in.
waterPerKg = f( fabricProcessed, totalWater, recycledWater, freshwaterCost )Each input feeds the expression evaluated in the browser; the symbol table below names every term and its unit.
| Symbol | Stands for | Unit |
|---|---|---|
fabricProcessed | Fabric Processed | kg/day |
totalWater | Total Process Water | m3/day |
recycledWater | Recycled / Reused Water | m3/day |
freshwaterCost | Freshwater Cost | /m3 |
waterPerKg | Water per kg of Fabric | L/kg |
freshwaterPerKg | Freshwater per kg | L/kg |
recyclingRate | Recycling Rate | % |
dailyFreshwaterCost | Freshwater Cost per Day | — |
costPerKg | Water Cost per kg | — |
How the result is derived
Step by step, from the values you type to the figure on screen.
- The 4 inputs are read from the form on every keystroke: Fabric Processed, Total Process Water, Recycled / Reused Water and Freshwater Cost.
- Each value is checked against the accepted range in the input table below. A value outside its range stops the calculation rather than producing a misleading figure — the results blank out and a message appears.
- The validated values are substituted into the expression above, which resolves Water per kg of Fabric together with every supporting figure in one pass — no value is carried over from a previous entry.
- The supporting outputs — Freshwater per kg, Recycling Rate, Freshwater Cost per Day and Water Cost per kg — come from the same pass, so they always describe the same case as the headline figure.
- Results are rounded for display only. The full-precision value is used throughout the chain, so reading a rounded intermediate figure back into the tool by hand can shift the last digit.
What each input means
Where to read each value on the floor, the unit it must be in, and the range the tool accepts.
| Input | Unit | Accepted range | Default | What it means |
|---|---|---|---|---|
| Fabric Processed | kg/day | 1 to 1000000 kg/day | 20000 | |
| Total Process Water | m3/day | 1 to 100000 m3/day | 1500 | |
| Recycled / Reused Water | m3/day | 0 to 100000 m3/day | 300 | |
| Freshwater Cost | /m3 | 0 to 100 /m3 | 0.5 |
What the tool returns
The headline figure and every supporting value it is built from.
| Output | Unit | What it tells you |
|---|---|---|
| Water per kg of Fabric (headline result) | L/kg | Total process water including reuse |
| Freshwater per kg | L/kg | |
| Recycling Rate | % | |
| Freshwater Cost per Day | — | |
| Water Cost per kg | — |
Worked example
Given
- Fabric Processed
- 20000 kg/day
- Total Process Water
- 1500 m3/day
- Recycled / Reused Water
- 300 m3/day
- Freshwater Cost
- 0.5 /m3
The tool loads with this case already solved — the Water per kg of Fabric shown above is its answer. Change one value and the difference from this baseline is the sensitivity of the result to that variable.
How to use it
- Work through the input groups in order — Production and Water. The defaults are a realistic case, so you can change one value at a time and watch what moves.
- There is no calculate button. Every figure recalculates as you type or drag, which is what makes this usable for a what-if sweep rather than a single answer.
- Read Water per kg of Fabric in the dark results panel — that is the headline figure, expressed in L/kg.
- Check the supporting rows underneath (Freshwater per kg, Recycling Rate, Freshwater Cost per Day and Water Cost per kg) before acting on the headline — they are where an implausible input usually shows itself first.
- Reset to defaults returns every field to the reference case, which is the quickest way to check whether a surprising result came from the tool or from an input you had changed earlier.
Where this is used
- Process planning — establishing Water per kg of Fabric before a trial is booked, so machine time and material in Finishing & Environmental Engineering are committed against a calculated figure rather than an estimate.
- Costing and quotation — Water per kg of Fabric is an input to the cost sheet, and quoting from a worked number rather than a remembered one is what keeps a margin intact.
- Troubleshooting — when the floor result drifts from plan, entering the measured values (starting with Fabric Processed) shows how much of the gap in Water per kg of Fabric each variable explains.
- Teaching and study — the accepted ranges bracket normal Finishing & Environmental Engineering practice, so moving one variable at a time shows the shape of the relationship rather than a single answer.
Assumptions and limits
- Best-practice dyehouses reach 50-80 L/kg. Above 150 L/kg the losses are usually in rinsing practice rather than machine design.
- Every input is bounded to the range normal practice occupies (Fabric Processed 1 to 1000000 kg/day, Total Process Water 1 to 100000 m3/day and Recycled / Reused Water 0 to 100000 m3/day, and so on for the rest). Those bounds are guard rails against typing errors, not a claim that the formula fails one unit outside them.
- The calculation is deterministic: the same inputs always give the same result. It carries no allowance for machine condition, operator skill, ambient conditions or lot-to-lot material variation unless an input above explicitly represents one.
- Nothing is sent anywhere. The maths runs in your browser, so the numbers you type never leave the page.
On this site
Articles that explain what this tool calculates.
Questions people ask
What do I need to know before using the Water Footprint per Kilogram of Dyed Fabric?
Have these to hand: Fabric Processed, Total Process Water, Recycled / Reused Water and Freshwater Cost. With those entered, the tool returns Water per kg of Fabric immediately.
What exactly is Water per kg of Fabric?
Total process water including reuse. It is reported in L/kg. It is derived from Fabric Processed, Total Process Water, Recycled / Reused Water and Freshwater Cost, and is the figure the rest of the Finishing & Environmental Engineering calculation is built around.
Which units does this calculator expect?
Enter Fabric Processed in kg/day, Total Process Water in m3/day, Recycled / Reused Water in m3/day and Freshwater Cost in /m3. Mixing unit systems is the most common cause of a result that looks an order of magnitude wrong — convert before typing, not after reading.
What are the other figures under the main result?
They are the intermediate quantities the calculation passes through: Freshwater per kg, Recycling Rate, Freshwater Cost per Day and Water Cost per kg. They are shown because a headline number nobody can trace is a number nobody trusts — checking them against your own expectation is the fastest way to confirm the inputs were read as you intended.
Can I rely on this for a production decision?
Best-practice dyehouses reach 50-80 L/kg. Above 150 L/kg the losses are usually in rinsing practice rather than machine design. Treat the output as an engineering estimate that narrows the trial window, not as a substitute for the trial.
Part of the Digital Product Passport hub — the EU regime, the tools, and what is not settled yet
Convert this result
Reference rate of 2026-11-16, published by the European Central Bank. Source
A reference rate is not a dealing rate. Banks and payment providers apply their own spread, so treat this as the mid-market figure a quotation is negotiated around rather than the money that will arrive.