The HHC-1800A is a fabric heat-cutting machine. An automatic tracking function corrects fabric drift so the cut stays straight. Each heated cutter blade has its own on/off switch, and a speed-heating button warms the blades quickly. It has a fully automatic mode in which stop positions can be preset, and the standard machine has an effective cutting width of 1,820 mm.
Cutting roomGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 1 of 3 key figures recorded
- Cutting height (max.)—
- Cutting speed (max.)—
- Cutting width1 820 mm
- Installed power2.27 kW
- Weight320 kg
- Make
HashimaJapanhashima.co.jp (the builder's website, opens in a new tab) All 74 machines from Hashima - Class
- Cutting room
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | Unit | Comparable |
|---|---|---|---|
| Product name | Auto heat cutter | ||
| Model | HHC-1800A | ||
| Power supply | 3P200V | ||
| Rated output | 2,270 | W | 2.27 kW |
| Maximum set width | 1,920 | mm | |
| Maximum cutting width | 1,820 | mm | |
| Heat cutters | 4 units (2 blades in the centre) | ||
| Tracking sensor | Photoelectric sensor type | ||
| Tracking function | Manual/automatic changeover switch | ||
| Winding speed | MAX 2.5 | m / min | |
| Weight | 320 | kg |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Other machines of this kind: Cutting room
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.