A flat-bed sublimation heat transfer press that applies heat and pressure to transfer sublimation prints. The upper iron is made of aluminium and has an anti-static Teflon sheet. It uses an electronic thermostat and S.S.R. so that the iron surface has an even temperature distribution. The builder says the special heater gives good thermal efficiency and a long life.
Heat transfer pressGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 5 key figures recorded
- Roller / platen width—
- Platen size600–1 200 mm
- Temperature (max.)230 °C
- Transfer time—
- Transfer speed (max.)—
- Installed power5.8 kW
- Weight400 kg
Specification
| Parameter | Value | Unit | Comparable |
|---|---|---|---|
| Power supply | 3P200V | ||
| Power consumption | 5.8 | kw | |
| Maximum current consumption | 17 | A | |
| Temperature (MAX) | 230 | ℃ | |
| Pressing force (MAX) | 315 | g/㎠ | |
| Pressing method | Motor pressing | ||
| Iron size | 1200×600 | mm | 600–1 200 mm |
| Machine dimensions (W×D×H) | 1200(W)×1550(D)×1570(H) | mm | |
| Weight | 約400 | kg |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Other machines of this kind: Heat transfer press
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.