Hashima HM-6010A / HM-6020A is a needle detector used in garment making. Its builder lists ベルトスピード 20m/min. It passes finished garments or packed goods through a magnetic sensing tunnel, or over a detecting table, to find broken needles and other ferrous metal fragments.
Needle detectorGarment makingNot established
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Detection width—
- Detection height—
- Sensitivity—
- Conveyor speed—
- Make
HashimaJapanhashima.co.jp (the builder's website, opens in a new tab) All 74 machines from Hashima - Class
- Needle detector
- Process stage
- Garment making
- Lifecycle
- Not established
Specification
| Parameter | Value | As published |
|---|---|---|
| 検出幅 | 600mm | HM-6010A |
| 検出幅 | 600mm | HM-6020A |
| 検出高 | 100mm | HM-6010A |
| 検出高 | 200mm | HM-6020A |
| 検出感度 | 鉄球φ0.8mm / ステンレス球(SUS304)φ1.5mm | HM-6010A |
| 検出感度 | 鉄球φ1.2mm / ステンレス球(SUS304)φ2.0mm | HM-6020A |
| ベルトスピード | 20m/min | HM-6010A |
| ベルトスピード | 20m/min | HM-6020A |
| 使用電源 | AC100V | HM-6010A |
| 使用電源 | AC100V | HM-6020A |
| 消費電力 | 150w | HM-6010A |
| 消費電力 | 150w | HM-6020A |
| 機体寸法 | 1600(L)×1050(W)×1200(H)mm | HM-6010A |
| 機体寸法 | 1600(L)×1050(W)×1300(H)mm | HM-6020A |
| 機体重量 | 290kg | HM-6010A |
| 機体重量 | 300kg | HM-6020A |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Archived copy
- None recorded. The source link may not survive, and this record cannot then be checked.
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.