Home » Machinery specifications » Dongguan Jiayuanda X10

Dongguan Jiayuanda X10

Dongguan Jiayuanda X10 is a sewing machine used in garment making, still in its builder’s current range. It joins fabric pieces with stitches formed by a needle thread interlocked with a bobbin or looper thread, lockstitch and chainstitch being the most common types. It is the core machine of garment assembly, following cutting and fusing; the class covers flat-bed, post-bed, cylinder-bed and automatic units, with overlock and buttonhole machines listed separately.

Sewing machineGarment makingIn the builder's current range

Key specifications

Specifications incomplete: 0 of 4 key figures recorded

  • Sewing speed (max.)—
  • Stitch length (max.)—
  • Presser foot lift (max.)—
  • Needle bar stroke—
Process stage
Garment making
Standards
Safety ISO 10821 Electrical equipment EN 60204-31
See it
Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H6-A30 (as listed by the organiser)

Specification

ParameterValueAs published
X10-D5028KHz±0.5KHzFrequency (max) (频率(max))
X10-D50≤1000WPower (功率)
X10-D50≤15mmBonding width (粘合宽度)
X10-D5045mmPatterned wheel diameter (花轮直径)
X10-D50≤10m/minMaximum speed (最大速度)
X10-D50360mm*130mmWorking space (工作空间)
X10-D50580mm*130mm*265mmBody dimensions (机体尺寸)
X10-D501200mm*550mm*1000mmOverall machine dimensions (整机尺寸)
X10-D50* Standard machine ships set to 220 V 50 Hz. * 110 V requires a step-up transformer; a 2000 W transformer is recommended. (* 标准机出厂默认220V 50Hz * 110V需选购升压器,建议选购2000W升压器。)Remarks (备注)

Read from the builder's published page: www.jydultrasonicwelding.com, on 2026-08-31.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.jydultrasonicwelding.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Also from Dongguan Jiayuanda

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device