- Make
LMW- Class
- Ring spinning frame
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | As published |
|---|---|---|
| Tube transfer rate | 40 tubes / minute | |
| Material staple length | up to 60 mm | |
| Spindle gauge | 70, 65 mm | |
| Spindles per section | 48 | |
| Number of spindles | Max – 1920, Min – 144 Spl. | |
| Spindle type | HLLD / HLED | |
| Spindle speed | up to 30,000 rpm | |
| Ring type | CREDO+ | |
| Lift | 160, 170, 180, 190 & 210 mm | |
| Tube length | 180 to 240 mm | |
| Ring diameter | 34, 36, 38, 40, 42, & 45 mm | |
| DUI | 16 / 18 / 20 / 22 mm | |
| Wharve diameter | 17.5 / 18.5 / 21 mm | |
| Hank of roving | 0.5 to 3.0 Ne | |
| Drafts | Up to 100 | |
| TPI range | 9.57 to 82.84 | |
| Cradle size | 36 mm / 39 mm / 41 mm / 43 mm / 59 mm | |
| Count range | 12’s to 200’s Ne | Cotton |
| Count range | 14’s to 120’s Ne | Synthetic Blend |
| Count range | 16’s to 120’s Ne | Synthetics |
Read from the builder's published page: www.lmwtmd.com, on 2026-10-29.
Run this machine
- Production of this frame carries Spindles per section
- End breakage at this speed carries Spindles per section
- Suction energy on this frame carries Spindles per section
The figures carried across are the builder's published ones. Replace them with your own machine's before you believe the answer.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Ring spinning frame
Elsewhere in Spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.