- Make
- Marzoli — Marzoli, part of the Camozzi Group. Country from the address on the builder own product pages: Via Sant Alberto 10, 25036 Palazzolo sull Oglio (BS), Italy.
- Class
- Ring spinning frame
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Count range | Ne 4 – Ne 350 / Nm 6 – Nm 678 / Tex 150 – Tex 1,68 |
| Twist range | Tw/’’ 4 – 56 / T/M 160 – 2,210 |
| Spindles gauge | 70 mm - 75 mm |
| Ring diameter | 36 - 54 mm |
| REGISTERED OFFICE | Via R. Rubattino, 81 - 20134 Milano (Italy) P IVA IT 03578690988 |
Read from the builder's published page: en.marzoli.camozzi.com, on 2026-08-31.
Run this machine
- Production of this frame carries Spindles gauge
- End breakage at this speed carries Spindles gauge
- Suction energy on this frame carries Spindles gauge
The figures carried across are the builder's published ones. Replace them with your own machine's before you believe the answer.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Marzoli
Other machines of this kind: Ring spinning frame
Elsewhere in Spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.