Nantong Hongda YG041 is a piece of laboratory equipment used in textile testing and quality control, still in its builder’s current range. Its builder lists feeding roller speed 0.9 r/min, machine width 490 mm and licker-in to mote knife gauge 0.56 mm. Laboratory equipment covers the instruments and small-scale machines a mill or research laboratory uses away from the production line: colour measurement, sample conditioning and preparation, chemical checks, and laboratory or pilot units for developing a process before it is scaled up.
Laboratory equipmentTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 0 of 5 key figures recorded
- Samples / beakers per run—
- Max. temperature—
- Measuring range—
- Accuracy—
- Test standards—
- Installed power0.8 kW
- Weight280 kg
- Make
Nantong HongdaChinanthongda.com (the builder's website, opens in a new tab) All 8 machines from Nantong Hongda - Class
- Laboratory equipment
- Process stage
- Testing and laboratory
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H8-A14 (as listed by the organiser)
Specification
| Parameter | Value | As published |
|---|---|---|
| Machine width | 490 mm | |
| Feeding roller diameter | 57.15 mm | |
| Feeding roller speed | 0.9 r/min | |
| Licker-in diameter | 238.76 mm | |
| Licker-in speed | 900 rpm | |
| Feeding table to licker-in gauge | 0.18-0.23 mm | |
| Licker-in to mote knife (leading edge) gauge | 0.56 mm | |
| Licker-in to streamline plate (leading edge) gauge | 0.18 mm | |
| Licker-in to stripping knife distance | 0.13 mm | |
| Feeding plate and roller distance | 0.13 mm | |
| Upper airflow regulating plate clearance | 0.20-0.40 mm | |
| Motor power | 0.8 kw | JFO2-21-4 =-23 |
| Motor speed | 1410 r/min | JFO2-21-4 =-23 |
| Voltage | 380 V/AC | |
| Length | 1019 mm | |
| Width | 715 mm | |
| Height | 874 mm | |
| Total machine weight | 280 Kg |
Read from the builder's published page: www.nthongda.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.nthongda.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Nantong Hongda
Other machines of this kind: Laboratory equipment
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.