Nantong Hongda Y572E is a fabric testing instrument, still in its builder’s current range. Its builder lists test speed 0 ~70 times/min, friction head stroke 1.125 turn and power 36 W. Fabric testing instruments measure fabric properties such as tensile and tear strength, abrasion and pilling resistance, colour fastness, dimensional stability and air permeability.
Fabric testingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 0 of 5 key figures recorded
- Test performed—
- Measuring range—
- Test stations / specimen holders—
- Test standards—
- Specimen size—
- Rubbing / friction stroke1 125 mm
- Installed power0.04 kW
- Make
Nantong HongdaChinanthongda.com (the builder's website, opens in a new tab) All 8 machines from Nantong Hongda - Class
- Fabric testing
- Process stage
- Testing and laboratory
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H8-A14 (as listed by the organiser)
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Friction head diameter | ∮ 16mm 、 ∮ 2 5mm | |
| Friction head weight | (11.1 ± 0.5 ) N | |
| Friction head stroke | 1.125 turn | 1 125 mm |
| Test speed | 0 ~70 times/min | |
| Dimensions | 390 × 1 56 × 220 mm | |
| Power supply | AC220V 5 0Hz | |
| Power | 36 W | 0.04 kW |
Read from the builder's published page: www.nthongda.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.nthongda.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Nantong Hongda
Other machines of this kind: Fabric testing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.