Home » Machinery specifications » Pegasus FS700P series

Pegasus FS700P series

Checked by an editor

Pegasus FS700P series is an overlock machine used in garment making, still in its builder’s current range. Its builder lists maximum speed 4,200 sti/min. It trims the fabric edge and encloses it in looper threads in one pass, seaming and neatening knitted or woven pieces; flatlock and coverstitch machines produce flat, stretchable seams and hems.

Overlock and flatlockGarment makingIn the builder's current range

Key specifications

Specifications incomplete: 1 of 5 key figures recorded

Process stage
Garment making
Standards
Safety ISO 10821 Electrical equipment EN 60204-31

Specification

ParameterValueAs published
Subclasses6: FS703P-G2, FS703P-G2B, FS703P-G2C, FS703P-G3, FS703P-G4, FS701TP-G0The builder sells a series as a set of subclasses that differ in gauge, feed and attachment. The register holds the series; this is the set it covers, and a figure quoted for the series may belong to only some of them.
Maximum speed4,200 sti/minStitches per minute as the builder prints it. The comma is a thousands separator - 4,200 is four thousand two hundred - which is unambiguous here only because a sewing head running at four stitches a minute is not a machine. Where a series lists more than one speed its subclasses differ.
UseJoining crotches of boxer briefs Inseaming on sweat pants Sewing medium-weight fleece / Joining crotches of panties with pre-attached thin elastic lacThe application the builder assigns, taken from the same table as the speed.

Read from the builder's published page: www.pegasus.co.jp, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for industrial sewing machines, units and systems.

Safety
ISO 10821 Industrial sewing machines — Safety requirements for sewing machines, units and systems — Amendment 1
Electrical equipment
EN 60204-31 Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.pegasus.co.jp,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device