- Make
- Pegasus
- Class
- Overlock and flatlock
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | As published |
|---|---|---|
| Subclasses | 21: M932-A-38, M932-A-44, M932-A-70, M932-A-86, M932-A-86H, M932-A-48, M932-A-48P2, M932-A-355 … | The builder sells a series as a set of subclasses that differ in gauge, feed and attachment. The register holds the series; this is the set it covers, and a figure quoted for the series may belong to only some of them. |
| Maximum speed | 5,000 sti/min / 5,500 sti/min / 6,000 sti/min / 6,500 sti/min / 7,000 sti/min | Stitches per minute as the builder prints it. The comma is a thousands separator - 4,200 is four thousand two hundred - which is unambiguous here only because a sewing head running at four stitches a minute is not a machine. Where a series lists more than one speed its subclasses differ. |
| Use | 3-needle versatile machine for plain seaming / Attaching U-shaped tape / Attaching tape / Backlatching / Blindstitch hemming / Butt-end sewing / Plain | The application the builder assigns, taken from the same table as the speed. |
Read from the builder's published page: www.pegasus.co.jp, on 2026-08-26.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Pegasus
Other machines of this kind: Overlock and flatlock
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.