- Make
- Rieter
- Class
- Carding
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Card C | 77 |
| Raw material Cotton and man-made fibers | up to 65 mm |
| Production | up to 225 kg/h |
| Installed power** | 23.4 – 30.7 |
| Delivery speed | up to 330 m/min |
| Compressed air | 0.7 Nm3/h |
| Cylinder speed | 500 – 930 rpm |
| Machine length (with standard chute) | 3 325 mm |
| Machine width | 2 380 mm |
| Machine weight (with standard chute) | 5 430 kg |
| Working width | 1 500 mm |
| ** with card sliver deposit | (1000 mm cans) and chute |
Read from the builder's published page: www.rieter.com, on 2026-08-22.
Archived copy, which will outlive the page above: snapshot captured 2026-02-15.
Run this machine
- Production of this card carries Delivery speed
The figures carried across are the builder's maxima — what the machine was built to reach, not what a mill runs it at. The gap between the two is most of the difference between a nameplate and a shift report, so replace them with what your own machine actually does before you believe the answer.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Carding
Elsewhere in Spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.