The Autoconer X6 is an automatic winding machine that winds staple fibre yarn from cops into cylindrical or conical packages, including dye packages and hard packages, in formats from 3 to 6 inches. It is offered in cop-processing types RM (manual cop feed), D (stand-alone with automatic cop feed) and V (direct link to the ring spinning machine). Rewinding types E, K and RC handle packages and residual packages. It is used in spinning mills as the final stage after ring or compact spinning.
AutowinderSpinningIn the builder's current range
Key specifications
4 of 4 key figures recorded
- Make
RieterSwitzerlandrieter.com (the builder's website, opens in a new tab) All 68 machines from Rieter - Class
- Autowinder
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-4 Noise ISO 9902-4
Specification
| Parameter | Value | Unit | Comparable |
|---|---|---|---|
| Yarn count | 2 - 140 | Ne | 4.22–295 tex |
| Package formats (traverse) | 3" - 6", cylindrical and conical up to 5°57’ | 76.2–152 mm | |
| Package diameter | max. 320 | mm | |
| Winding speed | 300 - 2 200 | m/min | |
| Number of winding units | up to 96 | ||
| Winding unit gauge | 320 | mm | |
| Machine types for cop processing | RM, D, V | ||
| Rewinding machines | E, K, RC (rewinding of packages and residual packages) | ||
| Machine height H1 (type D, V) | 2 896 | mm | |
| Machine height H2 (type D) | 2 700 – 3 580 | mm | |
| Machine length L1, 12 winding units (type D, V) | 7 902 | mm | |
| Machine length L1, 96 winding units (type D, V) | 35 406 | mm | |
| Flat-circular conveyor for type D + lifter (L2) | 3 615.5 – 4 015.5 | mm | |
| Underfloor link, interface standard (L3) | 2 500 | mm | |
| Underfloor link, additional interface for Rieter (L4) | 120 | mm |
Read from the builder's published page: www.rieter.com, on 2026-11-07.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for yarn processing, cordage and rope manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-4 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
- Noise
- ISO 9902-4 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.rieter.com,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Autowinder
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.