Rieter C 81 is a carding machine used in spinning, still in its builder’s current range. Its builder lists production up to 300 kg/h, delivery speed up to 500 m/min and machine width 2 450 mm. It opens tufts down to individual fibres, removes remaining trash, neps and short fibre, and condenses the web into a continuous sliver coiled into cans.
CardingSpinningIn the builder's current range
Key specifications
4 of 4 key figures recorded
- Make
RieterSwitzerlandrieter.com (the builder's website, opens in a new tab) All 68 machines from Rieter - Class
- Carding
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-2 Noise ISO 9902-2
Specification
| Parameter | Value |
|---|---|
| Raw material Cotton and man-made fibers | up to 65 mm |
| Production | up to 300 kg/h |
| Installed power** | 33.5 kW |
| Delivery speed | up to 500 m/min |
| Compressed air | 0.7 Nm 3 /h |
| Cylinder speed | 340 – 650 rpm |
| Machine length | 3 440 mm |
| Machine width | 2 450 mm |
| Machine weight (with standard chute) | 9 200 kg |
| Working width | 1 500 mm |
| Card C | 81 |
Read from the builder's published page: www.rieter.com, on 2026-08-22.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for spinning preparatory and spinning machines. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-2 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 1
- Noise
- ISO 9902-2 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Run this machine
- Production of this card carries Delivery speed
The figures carried across are the builder's maxima — what the machine was built to reach, not what a mill runs it at. The gap between the two is most of the difference between a nameplate and a shift report, so replace them with what your own machine actually does before you believe the answer.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.rieter.com,
- Archived copy
- snapshot, captured 2026-07-14
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Carding
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.