Rieter R 37 is a rotor spinning machine, still in its builder’s current range. Its builder lists delivery speed Up to 200 m/min, draft 25 – 300 fold and machine height for can height 900 mm. A rotor, or open-end, spinning machine opens sliver back into individual fibres with an opening roller and reassembles them inside a fast-turning rotor, where twist is inserted as the yarn is drawn off and wound directly onto cross-wound packages.
Rotor / open-end spinningSpinningIn the builder's current range
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Spinning positions (rotors)—
- Delivery speed (max.)200 m/min
- Rotor speed (max.)—
- Yarn count range14.5–299 tex
- Twist range80–2 200 T/m
- Draft range1:25–1:300
- Feed sliver count3 226–8 000 tex
- Fibre length (max.)60 mm
- Make
RieterSwitzerlandrieter.com (the builder's website, opens in a new tab) All 68 machines from Rieter - Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-2 Noise ISO 9902-2
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Semi-automated rotor spinning machine R | 37 | |
| * Machine height for can height | 900 mm | |
| ** Machine height for can height | 1 070 mm | |
| *** Machine height for can height | 1 200 mm | |
| Material Natural and man-made fibers | up to 60 mm length | |
| Sliver count Nm | 0.125 – 0.31; Ne 0.074 – 0.184; ktex 8 – 3.2 | 3 226–8 000 tex |
| Range of yarn counts Nm | 3.34 – 69; Ne 2.0 – 40; tex 300 – 14.5 | 14.5–299 tex |
| Draft | 25 – 300 fold | 1:25–1:300 |
| Yarn twist | 80 – 2 200 T/m | |
| Delivery speed | Up to 200 m/min | |
| Crossing angle Adjustable from | 30 ° to 40 ° in 1° steps | |
| L = | 12 415 |
Read from the builder's published page: www.rieter.com, on 2026-08-22.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for spinning preparatory and spinning machines. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-2 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 1
- Noise
- ISO 9902-2 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.rieter.com,
- Archived copy
- snapshot, captured 2026-04-10
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Rotor / open-end spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.