Rieter RSB 951 is a finisher draw frame used in spinning. It is the last drawing passage before the roving frame or rotor spinning, doubling and drafting breaker slivers into a sliver of controlled linear density. It differs from the breaker passage mainly in its autoleveller, which measures sliver thickness and corrects the draft continuously, since evenness at this point carries straight into the yarn.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Finisher draw frameSpinningNot established
Key specifications
Specifications incomplete: 0 of 5 key figures recorded
- Delivery speed (max.)—
- Deliveries—
- Doubling (max.)—
- Draft range—
- Delivered sliver count—
- Make
RieterSwitzerlandrieter.com (the builder's website, opens in a new tab) All 68 machines from Rieter - Class
- Finisher draw frame
- Process stage
- Spinning
- Introduced
- seen in service 1998
- Lifecycle
- Not established
- Standards
- Safety ISO 11111-2 Noise ISO 9902-2
Standards that apply to this class
Machines of this class fall under the textile machinery standards for spinning preparatory and spinning machines. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-2 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 1
- Noise
- ISO 9902-2 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Archived copy
- None recorded. The source link may not survive, and this record cannot then be checked.
- Last changed
Related machines
Other machines of this kind: Finisher draw frame
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.