The SERVOlap E 26 is a fully automated lap transport system for combing plants. It transports eight laps at a time from the combing preparation machine to the comber without contact, and conveys the empty tubes back to the combing preparation machine automatically. Grippers hold the laps on the inside of the tube during transport. Lap turnstiles allow flexible mill layouts, and an installation can be extended.
Material handlingUtilities and handlingIn the builder's current range
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Load capacity (max.)—
- Working width—
- Machine speed (max.)—
- Roll diameter (max.)—
- Make
RieterSwitzerlandrieter.com (the builder's website, opens in a new tab) All 68 machines from Rieter - Class
- Material handling
- Process stage
- Utilities and handling
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | Unit |
|---|---|---|
| Laps transported per transport | eight | laps |
| Combing preparation machines per plant installation (maximum) | four | machines |
| Combers per plant installation (maximum) | 24 | combers |
| Maximum length of extended plant installation | 100 | m |
| Combers per plant installation | 24 |
Read from the builder's published page: www.rieter.com, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.rieter.com,
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Material handling
Elsewhere in Utilities and handling
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.