- Make
- Saurer — Saurer built the first shuttle embroidery machine in 1878 and sold the embroidery business to Laesser Holding AG on 2 March 2022, transfer completed May 2022. Records held here are twisting and spinning plant; Saurer no longer builds embroidery machines.
- Class
- Two-for-one twister
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| VTS-11 | Spindle speed up to: 15.000 U/min. Feed package 6", Ø up to 96 mm |
| VTS-10 | Spindle speed up to: 14.500 U/min. Feed package 6", Ø up to 125 mm |
| VTS-09 | Spindle speed up to: 13.500 U/min. Feed package 6", Ø up to 140 mm |
| VTS-08 | Spindle speed up to: 12.500 U/min. Feed package 6", Ø up to 160 mm |
| Different feeding dimensions | We have three feeding dimensions for FusionTwister: 6'', 7'' and 8'' for single feeding tubes. |
Read from the builder's published page: saurer.com, on 2026-08-31.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Saurer
Other machines of this kind: Two-for-one twister
Elsewhere in Spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.