- Make
- Guoxing
- Class
- Two-for-one twister
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | As published |
|---|---|---|
| Number of sections (节数) | 1~8 sections | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Spindles per section (每节锭数) | 8 positions | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Overall dimensions (L×W×H) (外型尺寸（长×宽×高）) | 2800~12400×1200×1400 mm | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Weight (重量) | 2000 (8 sections) kg | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Spindle count (锭数) | spindles (锭) | Unit of measurement (测量单位) |
| Spindle count (锭数) | 8~64 | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Spindle gauge (锭距) | 350 mm | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Winding line speed (络筒线速) | m/min (米/分) | Unit of measurement (测量单位) |
| Winding line speed (络筒线速) | 650 | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Winding length (络筒长度) | 190 mm | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Yarn-feed motor power per spindle (每锭引纱马达功率) | 0.12 kw | GX-120 precision rewinder (GX-120 精密倒筒机) |
| Take-up motor power per spindle (每锭卷取马达功率) | 0.09 kw | GX-120 precision rewinder (GX-120 精密倒筒机) |
Read from the builder's published page: www.gxjx.net, on 2026-08-31.
Run this machine
- Production of this twister carries Spindles per section
The figures carried across are the builder's published ones. Replace them with your own machine's before you believe the answer.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Guoxing
Other machines of this kind: Two-for-one twister
Elsewhere in Spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.