SSM TG.30 A is a draw texturing machine used in spinning, still in its builder’s current range. It takes partially oriented filament yarn, draws it and passes it through a heater and false-twist unit to give bulk and stretch, producing textured yarn (DTY) wound onto packages. It follows POY filament spinning and supplies knitting and weaving with a yarn that has a textile hand rather than the flat, smooth feel of filament.
Checked against the builder's page. On 2026-11-06 an automated check found this model named on the builder's page, www.ssm.ch. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Draw texturing (DTY)SpinningIn the builder's current range
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Positions (spindles)—
- Process speed (max.)—
- Yarn count range—
- Primary heater length—
- Make
SSMPart of Rieter.Switzerlandssm.ch (the builder's website, opens in a new tab) All 34 machines from SSM - Class
- Draw texturing (DTY)
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-4 Noise ISO 9902-4
Read from the builder's published page: www.ssm.ch, on 2026-08-30.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for yarn processing, cordage and rope manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-4 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
- Noise
- ISO 9902-4 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.ssm.ch,
- Last changed
Related machines
Other machines of this kind: Draw texturing (DTY)
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.