Barmag eFK EvoSmart is a draw texturing machine used in spinning, still in its builder’s current range. Its builder lists energy consumption reduction 25 %, maintenance reduction 50 % and conversion cost reduction up to 15 %. It takes partially oriented filament yarn, draws it and passes it through a heater and false-twist unit to give bulk and stretch, producing textured yarn (DTY) wound onto packages.
Draw texturing (DTY)SpinningIn the builder's current range
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Positions (spindles)—
- Process speed (max.)—
- Yarn count range—
- Primary heater length—
- Class
- Draw texturing (DTY)
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-4 Noise ISO 9902-4
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H7-B09 (as listed by the organiser)
Specification
| Parameter | Value | Unit | As published |
|---|---|---|---|
| Energy consumption reduction | 25 | % | Per kilogram of yarn. A builder comparative; the page does not name the machine compared against. |
| Maintenance reduction | 50 | % | Builder comparative, baseline not named. |
| Conversion cost reduction | up to 15 | % | Builder comparative, baseline not named. |
Read from the builder's published page: www.barmag.com, on 2026-08-25.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for yarn processing, cordage and rope manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-4 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
- Noise
- ISO 9902-4 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.barmag.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Barmag
Other machines of this kind: Draw texturing (DTY)
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.