ASTM
ASTM D1907/D1907M Standard Test Method for Linear Density of Yarn (Yarn Number) by the Skein Method
The skein method for yarn count: wind a known length, weigh it, convert. The most-cited standard missing from this register — sixteen calculators on this site name it.
- Number
- ASTM D1907/D1907M
- Committee
- ASTM D13.58
- Status
- active
Verification coverage
Not yet checked: ISO, AATCC, BIS, SAC, JIS, EN, DIN — an absent row here does not mean no equivalent exists.
What this standard is for
Where it is used
Mill laboratories and yarn purchase specifications throughout the Americas, and wherever a buyer writes count tolerances to ASTM rather than ISO.
Why it matters
Count is the number a yarn is bought and sold on. A dispute over it is a dispute over the price of the whole lot, and the two sides usually discover mid-argument that they wound different skein lengths.
What to watch for
ISO 2060 measures the same property by the same principle and is already in this register. They are comparable, not interchangeable: confirm which the contract names, and confirm the skein length and the conditioning atmosphere with it. A count quoted without its atmosphere is not a count.
Calculators that implement this
- Card Sliver Draft, Can Capacity & Change Interval
- Cone Package Density, Volume & Dye Penetration Margin
- Draft & Draft Constant Calculator
- Drawframe Creel Blend Ratio, Quantum & End-Down Shift
- Fabric GSM & Yarn Consumption Calculator
- Filament Denier, Spinneret Hole Throughput & Spin Draw Ratio
- Ring Frame Production Estimator
- Roving Bobbin Build, Doff Interval & Changeover Loss
- Roving Hank to Yarn Count Draft Predictor
- Roving Twist Multiplier, Flyer Speed & Production
- Sectional Warping Sections, Beam Capacity & Maximum Warp Length
- Sewing Thread Consumption Estimator
- Sizing Add-On, Water Evaporated & Cylinder Drying Load
- Sliver Coil Geometry, Can Packing Density & Capacity
- Stitch Length & Course Length Estimator
- Universal Yarn Count Converter
- Warp Yarn Requirement Tool with Waste Factor
- Warping Machine Production & Beam Capacity Calculator
Buy the official copy from ASTM
Metadata only — purchase the standard from the issuing body.
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.