Page 63 of 84
When ‘colour’ is applied to a fabric it is termed as dyeing. Dyeing and printing of fabrics are usually done after routine or basic finishes but prior to the application of other finishes. It is mainly done to give color to the fabric and thus improve the appearance of the fabric.
Article
Special finishes are done on textile materials to enable it to use for special purposes such as the finishing of fabrics with flame retardants can reduce the tendency to burn or reduce the tendency to propagate the flame. Laminating is the permanent joining of two or more prefabricated fabrics.
Article
Fabrics to be used as raincoats, umbrellas, and tarpaulins have to be treated with chemicals to give them a property which makes them water resistant. The finish is called waterproofing and it is a durable finish. Water repellant finish is different from the waterproof finish. It means water, if showered on the fabric briefly, cannot make the fabric wet.
Article
Routine finishes are applied to almost all fabrics with an aim to improve their appearance. A finish is anything that is done to a fabric after weaving or knitting, to changes its appearance, hand and performance. When a finish is applied, say on cotton, it might become more shiny, stronger or resist shrinking on washing. Similarly, other finishes may make the fabric softer or stiffer; water or stain resistant; coloured or designed.
Article
There are finishes done on garments such as Permanent Press Finish particularly on pants for center crease of the pants to stay crisp and make them look fresh and neat.
Article
There are finishes applied to fabrics to enhance the look and feel of the fabric, in other ways the finishes neither strengthen the quality of the fabric nor they are done to transform the fabric for special purposes such as the fire retardant finish.
Article
Pre-shirking is needed almost on all fabrics because most textile materials shrink when washed. However preshrinking can only reduce the residual shrinkage to a lower percentage, but cannot completely eliminate it. On cotton fabrics, usually take away 8-10%shrinkage by preshrinking, leaving about 5-6% in them.
Article
Fabrics which are woven or knitted, freshly coming off the machine are called grey goods which must be treated in different ways to give them the important finishing touch. We call this finishing touch “finish”. This finishes we apply to fabrics are either for practical reasons or appearances. There is a wide range of finish we use on fabrics.
Article
The whole cycle of finishing consists of mechanical and chemical processes, which are used depending on the kinds and end uses of the fabric. Mechanical processes include drying, calendaring, schreinering, embossing, sueding, raisingetc and chemical processes include in the application of special substances on the fabric, impregnation with size, starch, dextrin and other polymeric substances.
Article
Textile finishing is a critical stage in the production of textiles, aimed at enhancing their functionality, aesthetics, and performance to meet diverse consumer and industrial needs. This article explores the primary objectives of textile finishing, including improving appearance, enhancing durability, imparting functional properties, ensuring comfort, and promoting sustainability. By examining these aims in detail, the article highlights the importance of finishing processes in delivering high-quality textile products for various applications.
Article
Every record in these registers was sent in by somebody. Submissions are reviewed before they are published.
1,481 machines in the register.Tell us about a missing one 288 event series in the register.Submit a trade fair or conference 3,037 standards tracked in the register.Get the changes by email each week