- Make
- Andao
- Class
- Autowinder
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Tension control (张力控制 tension control) | 30-300CN |
| Process speed (m/min) (工艺速度 Winding Speed(m/min)) | 50-500m/min |
| Maximum package diameter (mm) (最大丝饼直径(Max.) bobbin dia.(mm)) | 280mm |
| Paper tube inner diameter (mm) (纸管内径(mm) diameter of tube (mm)) | Inner diameter: 74mm/96mm |
| Paper tube length (mm) (纸管长度(mm) Length of tube) | Length: 210mm-300mm |
Read from the builder's published page: www.andaojx.cn, on 2026-08-30.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Autowinder
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.