The HW-20NS is a traverse winder that winds yarn onto bobbins. It has a one-touch bobbin stopper collar, and a timer sets the amount of yarn wound. It also has an inching device to set the winding start and a limit switch that stops the machine automatically when the yarn breaks. It is small and light enough to carry. Hashima lists it among its apparel auxiliary machines.
AutowinderSpinningIn the builder's current range
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Winding positions (drums)—
- Winding speed (max.)—
- Yarn count range—
- Package diameter (max.)—
- Traverse length97 mm
- Spindle (chuck) speed (max.)1 380 rpm
- Installed power0.08 kW
- Weight17 kg
- Make
HashimaJapanhashima.co.jp (the builder's website, opens in a new tab) All 74 machines from Hashima - Class
- Autowinder
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-4 Noise ISO 9902-4
Specification
| Parameter | Value | Unit | Comparable |
|---|---|---|---|
| Power supply | 100 | V | |
| Power consumption | 80 | W | 0.08 kW |
| Timer | 15 | min | |
| Bobbins used | 4-inch with collar / 4-inch without collar | ||
| Winding speed | 1,380 | r.p.m | |
| Traverse | 97 | mm | |
| Dimensions (L×W×H) | 850(L)×290(W)×500(H) | mm | |
| Weight | 約17 | kg |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for yarn processing, cordage and rope manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-4 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
- Noise
- ISO 9902-4 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Other machines of this kind: Autowinder
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.