The machine unwinds the fabric roll without tension, then moistens it on a mesh conveyor with three high-humidity steaming units and two vibration devices to relax the fabric. The fabric is then heated on a Teflon belt under a steam/electric hybrid heater and cooled to room temperature by two sirocco fans. It is folded to 600 mm width at the exit. It handles natural and synthetic fibres, and processing speed is adjustable from 0 to 12 m/min.
Steaming and steam-shrinkingDyeing, finishing and printingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 3 key figures recorded
- Make
HashimaJapanhashima.co.jp (the builder's website, opens in a new tab) All 74 machines from Hashima - Process stage
- Dyeing, finishing and printing
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-7 Noise ISO 9902-7
Specification
| Parameter | Value | Unit | Comparable |
|---|---|---|---|
| Power supply | Three-phase 3.2 | kw | |
| Steam pressure, consumption | 0.6Mpa 150 | kg/h | 150 kg/h |
| Steam connection diameter | 入り口、出口共20A(3/4B) | ||
| Compressed air connection diameter | 10 | mm | |
| Compressor capacity | 0.75 | kw or more (以上) | |
| Hood exhaust diameter (exhaust fan required) | 250 | mm | |
| Cooling vacuum diameter | 150 | mm | |
| Maximum processing width | 1800 | mm | |
| Processing speed (normal use 5–7 m/min) | 1.2~12 | m/min | |
| Folding width | 600 | mm | |
| Machine dimensions HSM-1800-II (W×D×H) | 4260×2500×1870 | mm | |
| Machine dimensions HSM-1800-III (W×D×H) | 4840×2500×1870 | mm | |
| Weight HSM-1800-II | 2100 | kg | |
| Weight HSM-1800-III | 2200 | kg |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for dyeing and finishing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-7 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery — Amendment 2
- Noise
- ISO 9902-7 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Other machines of this kind: Steaming and steam-shrinking
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.