The shuttle cutter is an end cutter that cuts spread fabric. It has two blades and cuts in both directions of travel, so no time is lost on the return run. The KSP-AT / KE-AT type travels automatically, and its rail is raised and lowered by hand. It has a preset piece counter that keeps its value when the power is switched off, a built-in dust collector, and a high-speed rotating blade.
Cutting roomGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 0 of 3 key figures recorded
- Cutting height (max.)—
- Cutting speed (max.)—
- Cutting width—
- Make
HashimaJapanhashima.co.jp (the builder's website, opens in a new tab) All 74 machines from Hashima - Class
- Cutting room
- Process stage
- Garment making
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | Unit |
|---|---|---|
| Product name | Shuttle cutter | |
| Type (KSP-AT / KE-AT) | Automatic travel | |
| Rail lifting (KSP-AT / KE-AT) | Manual | |
| Cutting (KSP-AT / KE-AT) | Automatic | |
| Cutting motor voltage | 100 / 220 | V |
| Cutting motor speed | 1500 | rpm |
| Piece counter | Standard | |
| Blade rotation speed change | Optional | |
| Cutting travel speed change | Standard | |
| High-speed rotating blade speed | 175,000 | rpm |
Read from the builder's published page: www.hashima.co.jp, on 2026-11-07.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.hashima.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Hashima
Other machines of this kind: Cutting room
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.