Morgan Tecnica PLY1 Δ is a cutting-room machine used in garment making, still in its builder’s current range. Its builder lists maximum speed 180 m/min, installed power 16.5 kW and cutting area dimensions 180 x 250 cm. Cutting room machines cut garment parts from spread fabric lays, using straight-knife or band-knife cutters or automatic computer-controlled cutters that follow the marker.
Cutting roomGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 1 of 3 key figures recorded
- Cutting height (max.)—
- Cutting speed (max.)180 m/min
- Cutting width—
- Working area180–2 500 mm
- Installed power16.5 kW
Specification
| Parameter | Value | As published |
|---|---|---|
| Cutting Area Dimensions | 180 x 250 cm | H 180 x L 250 cm |
| Cutting Area Dimensions | 220 x 250 cm | H 220 x L 250 cm |
| Cutting Area Dimensions | 280 x 320 cm | H 280 x L 320 cm |
| Humidity | < 95 ° | |
| Voltage / Frequency | 400 V | 400 V 50/60 Hz 3PH |
| Installed Power | 16.5 kW | |
| Maximum Speed | 180 m/min | |
| Maximum Acceleration | 29.4 m/s² | con un utensile |
Read from the builder's published page: www.morgantecnica.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.morgantecnica.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Morgan Tecnica
Other machines of this kind: Cutting room
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.