Morgan Tecnica REX 70 DENIM is a cutting-room machine used in garment making, still in its builder’s current range. Its builder lists max. positioning speed 120 m/min, effective cutting window width 180 – 220 cm and installed electrical power 10 kW + 22 kW. Cutting room machines cut garment parts from spread fabric lays, using straight-knife or band-knife cutters or automatic computer-controlled cutters that follow the marker.
Cutting roomGarment makingIn the builder's current range
Key specifications
Specifications incomplete: 1 of 3 key figures recorded
- Cutting height (max.)—
- Cutting speed (max.)—
- Cutting width1 800–2 200 mm
- Blade stroke frequency (max.)6 000 rpm
Specification
| Parameter | Value |
|---|---|
| Max. cutting acceleration | 8 m/s 2 |
| Max. positioning speed | 120 m/min |
| Max. positioning acceleration | 10 m/s 2 |
| Effective cutting window width | 180 – 220 cm |
| Average energy consumption | 6,1 kW/h |
| Installed electrical power | 10 kW + 22 kW |
| Voltage / Frequency | 400 V 3Ph 50/60 Hz |
| Maximum blade vibration frequency | 6.000 rpm |
Read from the builder's published page: www.morgantecnica.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.morgantecnica.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Morgan Tecnica
Other machines of this kind: Cutting room
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.