Rieter E 40 is a lap former used in spinning, still in its builder’s current range. Its builder lists production up to 800 kg/h, delivery speed 230 m/min and lap width 300 mm. It lays a number of drawn slivers side by side and drafts them lightly into a wide, uniform lap wound onto a tube, ready to feed the comber.
Lap formerSpinningIn the builder's current range
Key specifications
4 of 4 key figures recorded
- Make
RieterSwitzerlandrieter.com (the builder's website, opens in a new tab) All 68 machines from Rieter - Class
- Lap former
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-2 Noise ISO 9902-2
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Machine dimensions with | 28 cans With cans ∅ 600 mm With cans ∅ 1 000 mm With cans ∅ 1 200 mm (only 24 cans) | |
| Machine width with cans | 3 925 mm 4 645 mm 5 480 mm | |
| Doubling | max. 28-fold | |
| Draft | 1.4 – 2.4-fold | 1:1.4–1:2.4 |
| Delivery speed (consistent) | 230 m/min | |
| Production | up to 800 kg/h | |
| Lap width | 300 mm | |
| Max. lap diameter | 580 mm | |
| Max. lap weight | 25 kg | |
| Installed power | 21.5 kW | |
| Compressed-air requirement | 7 bar | |
| Can creel ∅ | 1 200 × 1 200 mm ( ∅ 48 in × 48 in) | |
| Dedusting Connected to external system | 19 |
Read from the builder's published page: www.rieter.com, on 2026-08-22.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for spinning preparatory and spinning machines. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-2 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 1
- Noise
- ISO 9902-2 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.rieter.com,
- Archived copy
- snapshot, captured 2026-01-19
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Lap former
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.