- Make
- Rieter
- Class
- Comber
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Weight | max. 21 kg 25 kg |
| Diameter | max. 550 mm 650 mm |
| Width | 300 mm |
| Noil extraction | 8 – 25% |
| Doubling | 8 |
| Draft | 10.9 - 26-fold |
| Max. production | 100 kg/h 97 kg/h |
| Ri-Q-Top comb | 2026, 2030, 2035, 2040 |
| Drafting system | 4 over 3 with pressure bar |
| Reserve cans | 1 or 2 (for 600 mm cans) |
| Can diameter | 600 mm, 24 inches/1 000 mm, 40 inches/ |
| castors | 1 200 mm, 48 inches |
| Max. nips per minute | 600 |
| Frequency | 50 Hz/60 Hz |
| Installed power | 5.5 kW (main motor) |
| Power consumption | 5 kWh @ 550 npm |
| Compressed air requirements | 0.4 m3/h @ 7 bar |
| ROBOlap retrofittable | 19 |
Read from the builder's published page: www.rieter.com, on 2026-08-22.
Archived copy, which will outlive the page above: snapshot captured 2025-04-21.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Comber
Elsewhere in Spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.