Trützschler TCO 21 is a comber used in spinning, still in its builder’s current range. Its builder lists productivity 600 nips/minute and combing speed 600 nips per minute. It removes short fibres, neps and remaining impurities from a lap by repeatedly gripping a fringe of fibres and combing it with a needled cylinder and top comb, producing a cleaner, more parallel sliver.
Checked against the builder's page. On 2026-11-06 an automated check found every figure on this record on the builder's page, www.truetzschler.com, and the page names this model. No editor has reviewed it; confirm against the source before sizing or ordering.
ComberSpinningIn the builder's current range
Key specifications
Specifications incomplete: 1 of 4 key figures recorded
- Combing speed (nips/min)600 rpm
- Production (max.)—
- Combing heads—
- Noil extraction—
- Make
- TrützschlerGermanytruetzschler.com (the builder's website, opens in a new tab) All 37 machines from Trützschler
- Class
- Comber
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-2 Noise ISO 9902-2
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H7-C11 (as listed by the organiser)
Specification
| Parameter | Value |
|---|---|
| productivity | 600 nips/minute |
| combing speed | 600 nips per minute |
Read from the builder's published page: www.truetzschler.com, on 2026-10-29.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for spinning preparatory and spinning machines. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-2 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 1
- Noise
- ISO 9902-2 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.truetzschler.com,
- Archived copy
- snapshot, captured 2026-01-20
- Last changed
Related machines
Also from Trützschler
Other machines of this kind: Comber
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.