Home » Machinery specifications » Rieter E 90 with ROBOlap

Rieter E 90 with ROBOlap

Checked by an editor

The comber E 90 produces up to 100 kilograms of combed sliver per hour. The piecing process of the lap batt and the restarting of the comber is fully automated by the ROBOlap system. The gentle, controlled fiber treatment is achieved by optimally coordinated combing movements and the technology elements developed by Rieter.

ComberSpinningIn the builder's current range

Specification

ParameterValueUnitComparable
Production (max.)100kg/h
Combing speed (nips/min)600
Noil extraction8 – 25%
Lap weight (max.)21kg
Lap width300mm
Lap diameter (max.)550mm
Feed per nip4.3/4.7/4.95/5.2/5.55/5.94.3–5.9 mm
Draft range10.9 - 26-fold1:10.9–1:26
Doubling8
Can diameter600 mm, 24 inches/1 000 mm, 40 inches/ 1 200 mm (no inch can available)600–1 200 mm
Drafting system4 over 3 with pressure bar
Installed power5.5 kW (main motor) 11.12 kW (total)
Compressed air0.4m3/h @ 7 bar
Raw material, commercial staple1 – 1½ (– 1 ⅞)inches
Batt weight(60) 64 – 80g/m
Sliverweight at delivery3 – 6ktex
Frequency50 Hz/60 Hz
Power consumption5kWh @ 550 npm
Ri-Q-Comb circular combi505 flex-d40/i705 flex-d40
Ri-Q-Top comb2026, 2030, 2035, 2040
Reserve cans1 or 2(for 600 mm cans)
Can height with castors1 200 mm, 48inches
Machine distance with SERVOtrolley3 000 mm(with DUC600)
Machine distance with SERVOlap2 800 mm(with DUC600)
Lap transport systemSERVOtrolley E 17 (semi-automated) SERVOlap E 26 (fully automated)

Read from the builder's published page: www.rieter.com, on 2026-11-12.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for spinning preparatory and spinning machines. The common requirements of ISO 11111-1 apply to every machine in this family.

Safety
ISO 11111-2 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 1
Noise
ISO 9902-2 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.rieter.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device