Reference register
3,037 test methods indexed by number across ISO, ASTM, AATCC, BIS, GB, JIS and EN, 503 of them with a full record. Where an equivalent is known it is stated as IDT, MOD or NEQ, with the deviation declared wherever it is MOD.
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 341–350 of 3,037
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
Textiles — Quantitative chemical analysis — Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite)
Protein fibres - wool, silk, other animal hair - destroyed by hypochlorite, leaving cellulosics or synthetics. Hypochlorite is aggressive: over-running it attacks the residue as well, which shows…
Textiles — Quantitative chemical analysis — Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
Regenerated cellulose - viscose, cupro, modal - dissolved in sodium zincate, leaving cotton. This is the difficult one in the series: viscose and cotton are both cellulose, so…
Textiles — Quantitative chemical analysis — Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
Viscose, cupro, modal or lyocell dissolved in formic acid with zinc chloride, leaving cotton or other fibres. The alternative route to Part 5 for the same difficult separation,…
Textiles — Quantitative chemical analysis — Part 7: Mixtures of polyamide with certain other fibres (method using formic acid)
Polyamide dissolved in formic acid, leaving wool, cotton, polyester and most other fibres. One of the cleanest separations in the series, which is why nylon blends are among…
Textiles — Quantitative chemical analysis — Part 8: Mixtures of acetate and triacetate fibres (method using acetone)
Acetate dissolved in acetone, leaving triacetate. Separating two fibres of the same chemical family on nothing but their degree of acetylation, which is why the timing and temperature…
Textiles — Quantitative chemical analysis — Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol)
Acetate dissolved in benzyl alcohol. The route for acetate blends where the other component would not survive acetone, or where acetone fails to separate them cleanly. The residue…
Footwear — Test methods for slide fasteners — Resistance to damage during closure under a lateral force
Footwear — Test methods for slide fasteners — Resistance to damage during closure under a lateral force
Reinforcement fibres — Sampling plans applicable to received batches
Classified under ICS 59 or 61, the international subject classifications for textile technology and the clothing industry.
Reinforcement yarns — Determination of linear density
Reinforcement yarns — Determination of linear density
Every record in these registers was sent in by somebody. Submissions are reviewed before they are published.
1,481 machines in the register.Tell us about a missing one 302 event series in the register.Submit a trade fair or conference 3,037 standards tracked in the register.Get the changes by email each week