Page 71 of 84
This comprehensive guide explores the various facets of quality control in garment manufacturing, from the importance of quality control to the methods and techniques employed, as well as the challenges and innovations in the field.
Article
Some garments, dyeing is done after final assembly in order to ensure a perfect colour match for items intended to be worn together.
Article
Although pressing remains largely a manual task, new automated process exists that apply force and steam to garments placed over a body form.
Article
Bundling is the process of disassembling the stacked and cut pieces and reassembling them in production lots grouped by garment unit, colour dye lot, and number of garments.
Article
Cutting is the process which cut out the pattern pieces from specified fabric for making garments.Using the markers made from graded patterns and in accordance with the issue plan, fabrics are cut to prepare garment assembly. This is the major operation of the cutting room, of all of the operations in the cutting room this is the most decisive because once the fabric has been cut, very little can be done to rectify serious mistakes.
Article
Marking refers to the process of placing pattern pieces to maximize the number of patterns that can be cut out of a given piece of fabric in order to make garments.Pattern making is a highly skilled technique which calls for technical ability, sensitivity for design interpretation and a practical understanding of the process technology used by the factory.
Article
Pattern Grading is the process whereby patterns of different sizes are produced from the original master pattern. This process can be performed manually or automatically by a computerized system. Patterns are graded according to size charts which present the sizes and the average measurements of the population group for which the garments are intended.
Article
Garment designers begin to materialize their ideas using hand sketches, off-the-rack garments, technical drawings, three-dimensional draping on dress forms, or computer-aided design (CAD)
Article
A product or manufacturing specification should be used to test against when evaluating to check whether the product is correctly made. The manufacturing specification provides all the detailed information required to make the product.
Article
Every record in these registers was sent in by somebody. Submissions are reviewed before they are published.
1,481 machines in the register.Tell us about a missing one 288 event series in the register.Submit a trade fair or conference 3,037 standards tracked in the register.Get the changes by email each week
